How to read your tire size
How to read your tire size
Your tire size looks like a code. It is not hard to read once you know what each part stands for.
Take a common size: 225/65R17
Every tire for a car, SUV, or light truck has a string like this on its sidewall. Let us go through it one piece at a time.
The numbers, one by one
225 — the width
This is how wide the tire is, in millimeters, from one sidewall to the other. In this example, the tire is 225 millimeters wide.
A wider number means a wider tire. It does not, by itself, mean a better tire. Your vehicle was designed for a specific width.
65 — the aspect ratio
This is the height of the sidewall, shown as a percentage of the width.
Here, the sidewall height is 65% of 225 millimeters. A lower number, like 45, means a shorter, stiffer sidewall. A higher number, like 75, means a taller, softer sidewall.
This number matters for fit. Change it, and you change the overall diameter of the tire and wheel together.
R — radial construction
The R stands for radial. That describes how the layers inside the tire are built. Almost every passenger tire sold today is a radial. You will rarely need to think about this letter, but it is part of the size.
17 — the wheel diameter
This is the diameter of the wheel the tire fits on, in inches. A tire made for a 17-inch wheel only fits a 17-inch wheel. This number has to match exactly.
The letters before the numbers
Sometimes there is a letter or two at the start.
- P means passenger vehicle — cars, minivans, most SUVs and crossovers.
- LT means light truck. These tires are built for heavier loads, like full-size pickups and large SUVs that tow or haul.
That first letter matters. A P tire and an LT tire with the same numbers are not the same tire. They carry weight differently.
The numbers after the size
Right after the size you will often see something like 102H. This is called the service description. It has two parts.
102 — the load index
This is a code for how much weight one tire can carry safely. It is not pounds written out. It is a number you look up on a standard chart.
You do not need to memorize the chart. You need one rule: never fit a tire with a lower load index than the one your vehicle came with. A higher index is generally acceptable. A lower one is not.
H — the speed rating
This letter is a code for the maximum speed the tire is built to handle under proper conditions. Common ratings for everyday cars include S, T, H, and V, in rising order.
This is not a suggestion to drive fast. It is a measure of how the tire handles heat and stress. Like the load index, do not go below what your vehicle came with.
Where to find your correct size
You have two main places to look, and they do not always say the same thing.
1. The tire sidewall
This tells you what is on the car right now. Read the full string on the side of the tire. It is raised in the rubber, sometimes in small print.
The problem: a previous owner may have fitted a different size. What is on the car now is not proof it is correct.
2. The door placard
Open the driver's door and look at the frame. There is a sticker there, often called the tire placard. It lists the original tire size for your vehicle, and the correct air pressure for that size.
This placard is the authority. If the sidewall and the placard disagree, trust the placard, and ask a tire shop why they differ before you buy.
You can also find the size in your owner's manual. Some vehicles also list it inside the glove box or on the fuel door, but the door placard is the standard place.
One warning about air pressure
The placard lists the pressure your vehicle maker recommends.
The tire sidewall lists a maximum pressure. That is a limit for the tire, not a target for your car.
Fill to the placard number, not the sidewall maximum. Check pressure when the tires are cold, before driving.
What to do with this when you shop
Write down the full string from the placard, including the load index and speed rating if they are listed there.
Use that exact size as your starting point. If a shop suggests a different size, ask two questions: Does it keep the overall diameter close to the original? Does it meet or exceed the original load index?
If the answer to either question is unclear, do not buy that day. A wrong size is a safety problem and a money problem. The right size, written on a sticker in your door, takes thirty seconds to check.