UTQG ratings, explained honestly
UTQG ratings, explained honestly
On the sidewall of most passenger tires you will find three grades: treadwear, traction, and temperature. Together they are called UTQG — Uniform Tire Quality Grading.
The system comes from the U.S. government. It is administered by the National Highway Traffic Safety Administration, NHTSA. It was meant to help buyers compare tires.
It can help. But it has one serious limit that most marketing leaves out, and you should know it before you trust any of these numbers.
The three grades
Treadwear
This is a number, like 300, 500, or 700. Higher is supposed to mean the tire lasts longer.
The grade comes from a controlled test. A tire is driven on a set course, and its wear is compared to a reference tire. A grade of 200 means the tire wore twice as slowly as the reference tire in that test. A grade of 100 means it wore at the same rate.
That sounds like a promise about miles. It is not. It is not a guarantee of 30,000 miles, 50,000 miles, or any other number of miles. Real life — your roads, your speed, your alignment, your pressure, your rotation — changes the result a great deal.
If you want a mileage figure a maker actually stands behind, look for the manufacturer's mileage warranty, which is a separate thing. We explain the difference in our cost-per-10,000-miles guide.
Traction
This is a letter grade for wet grip in a straight line: AA, A, B, or C, from highest to lowest.
The test measures how well a tire grips wet pavement when braking in a straight line, on asphalt and on concrete. AA is the top grade. Most everyday tires today are A or AA. C is the minimum passing grade.
Note what the test does not measure. It does not measure cornering grip. It does not measure dry grip. It does not measure hydroplaning resistance in deep water, or grip in snow. It is one narrow test, done one way.
Temperature
This is a letter grade for heat resistance: A, B, or C, from highest to lowest.
Heat is what destroys tires at sustained speed. This grade reflects how well a tire holds up to heat build-up, and how well it sheds that heat, in laboratory testing. A is the top grade. C is the minimum required by federal safety standards.
If you drive long distances at highway speed, especially in hot weather, this grade is not a detail. A tire that cannot handle heat can fail.
The serious limit: who assigns the grades
Here is the part to remember.
The manufacturer grades its own tires.
This is a self-certification system. The tire maker runs or commissions the tests, assigns the grades, and reports them. NHTSA does not test every tire before it is sold. The agency does spot-check, and it can act when grades look wrong, but the number on the sidewall came from the maker in the first place.
That leads directly to the second problem.
Treadwear grades are not comparable across brands.
A 600 from one maker and a 600 from another maker do not mean the two tires will last the same number of miles. Each maker grades against the reference in its own program, and makers are more or less generous in how they assign the number. There is no single referee forcing every brand onto the same real-world scale.
What treadwear is still useful for is narrower: comparing tires within the same brand. If one maker sells two tires graded 400 and 700, the 700 is that maker's longer-wearing tire. That comparison is meaningful. The cross-brand comparison is not.
We say this plainly because our own recommendations use UTQG data. We publish it because it is public data from NHTSA and it is better than nothing. We do not pretend it is more precise than it is.
Who is left out of the system
UTQG does not cover everything on the road. Two large groups sit outside it:
- LT tires. Light truck tires — the kind fitted to many pickups and large SUVs — are not graded under UTQG. If your vehicle uses LT tires, you will not find these three grades, and no one should invent them for you.
- Dedicated winter tires. Winter tires are also excluded from the grading requirement. Their makers may print grades on some models, but the system was not built for them.
Deep-tread, off-road, and spare tires have their own exclusions as well. The point is simple: an empty space where a grade should be does not mean a bad tire. It often means a tire outside the system.
How to use UTQG well
Use it like this:
1. Use traction and temperature as a floor. Prefer A or AA for traction and A or B for temperature in a normal passenger tire.
2. Use treadwear only to compare tires from the same maker.
3. Use the mileage warranty, not the treadwear number, when you compare cost over time.
4. If a tire has no UTQG grades, check whether it is an LT or a winter tire before you judge it.
Ratings help when you know what they are. They mislead when you treat a self-assigned number as an independent measurement. On TireDoc, we label UTQG data as what it is, every time.